Greatest reference in our business is our successful past

Thermal control device PTC for thermistors

Thermal control device  PTC for thermistors
Alma Elettronica
Thermal control device  PTC for thermistors
THERMAL CONTROL WITH PTC OF TRANSFORMERS, MOTORS AND ELECTRIC GENERATORS
Microprocessor device for thermal control of transformers, motors and electric generators. Equipped with 3 input channels for PTC probes. Relay outputs for: fan activation, alarm, unhook, probe's damage or out of control signal. Easy time delay fan off programming.

TECHNICAL SPECIFICATIONS

Power supply

  • nominal line voltage and frequency: 24 ÷ 240 Vcc e 24 ÷ 240 Vac at 40÷60 Hz
  • maximum line voltage from 20 to 250 Vac and Vcc
  • Vcc with reversible polarity
  • Maximum power absorption 5 VA
  • Protection against electrical and magnetic noises

Inputs

  • 3 analog input channels for Ptc probes
  • connection with removable terminals for wires of 1,5 mm2 section and capacity of 8A/250Vac
  • detection for broken or not connected probes
  • input channels protected against electromagnetic noises and spikes

Outputs

  • 3 output relays with contacts capacity of 5A with 250Vac
    • one relay for the series A1 (for fan control)
    • one relay for the series A2 (pre-alarm) and for probe fault or working anomaly signaling (general alarm)
    • one relay for the series A3 (unhook of the electrical unit)
  • output connection with removable terminals for wire of 1,5 mm2 section and capacity of 8A/250Vac

Device dimensions

  • frontal dimension 48 mm x 96 mm compliance with DIN 43700 requirements. Device length of 105 mm with rear terminals
  • assembling on the front of the electric panel
  • Panel cut-out 44 mm x 92 mm
  • ABS self-extinguishing container
  • Frontal panel in anti-scratch with keyboard and signal leds

Performances

  • Probe self-diagnostics
  • Operating temperature range from 5 °C to +50 °C
  • Humidity lower then 95% no-condensing
  • Compliance with CE requirement
  • User data storage for 10 years without power supply
  • Device functionality self-diagnostic
  • Alarm signal for working anomalies

Displaying and data management

  • 3 leds indicating alarm levels
  • 1 led indicating working anomalies or probe fault
  • 5 leds to visualize the delay set on A1 series alarm (for fan control)
  • user data programming by membrane keypad

Tutti questi dati sono contenuti nella brochure tecnica del dispositivo PTC (brochurePTCe.pdf).

More Info Price

Alma Elettronica MARKASINA A?T ?R?N GRUPLARI

*manuals
*manuals
Thermal control device  NEX for Pt100 probes
Thermal control device NEX for Pt100 probes
Thermal control device  PTC for thermistors
Thermal control device PTC for thermistors